Professional 16-Piece Lock Pickaxe Set Essential Car Kit Long Up to Grabber Air Wedge Pump Locksmith Supplies

Airbag-Assisted Entry: Easy Steps

1. Get Your Tools:

   • You need one or two air wedges and a long stick or rod.

2. Put in the Air Wedges:

   • Slide the air wedges (deflated) between the top of the car door and the frame. Be careful not to damage the car.

3. Pump Up the Air Wedges:

   • Slowly pump air into the wedges. This will make a small gap. Don’t over-pump, or you might damage the door.

4. Make Space:

   • When there is a small gap, put the long stick inside to reach the car's lock.

5. Unlock the Car:

   • Use the stick to lift the lock pin or pull the inside door handle. The car will unlock if you pull the handle.

6. Remove the Air Wedges:

   • Let the air out of the wedges and take them out. Check to make sure there is no damage.

2. Safety Tips

General Safety:

• Be careful with your tools and don’t use too much force.

• Watch the lock and door to make sure you don’t damage anything.

For BMW Cars:

• Don’t jump-start the car directly on the battery. Use the special points for jump-starting.

• Be extra careful when unlocking to protect the car’s electronics.

Using Airbags:

• Only pump the airbags enough to make a small gap.

• Too much pressure can damage the door frame or seals.

3. Tool Tips

A. Using the Lishi Tool:

• Be gentle and use just the right amount of pressure.

• Feel each pin slowly to avoid getting the tool stuck.

• If you are new to the Lishi tool, take our training course to learn more.

B. Using Airbags:

• Pump the airbags slowly and only a little to avoid damaging the door.

• Use a long tool to unlock the door from the inside safely.